Vape Tank

Choosing the right one is a huge step toward the best possible, and most enjoyable, vaping experience. Why not view this section in Vapingcig and pick up one ti fit your needs.

Showing 1–9 of 40 results

Show sidebar

Aspire Atlantis Sub Ohm Tank

$45.00 $21.95
Aspire's Atlantis has raised the bar to new heights. This next generation tank system brings improved adjustable airflow and Sub Ohm coils that provides performance similar to even the best rebuildable atomizer.

Aspire Nautilus 2S Tank for MTL Vape

$27.95 $23.76
Aspire Nautilus 2S MTL tank, the utilization of BVC coil, featuring 2.6ml/2ml e-juice capacity, convenient slide-to-open top fill system, adjustable airflow. Nautilus 2S tank can be paired with Zelos 50W mod to satisfy a myriad of vapers.

Aspire Tigon Subohm Tank

$24.95 $21.21
Aspire Tigon, a versatile subohm tank that will satisfy a variety of vaper’s needs with supplied 0.4ohm Coil and 1.2Ω Coil for restricted DTL(former) or MTL(latter). Featuring detachable structure, which means, cleaning and dripping oil is easy peasy.

Eleaf ELLO Duro Tank Atomizer

$22.00 $18.70
Eleaf ELLO Duro atomizer boasts all-new Net Coil and Multihole Coil system, providing you fancy vaping experience with ultra flavorful taste and massive clouds. 6 colors and 2 editions are free to choose.

Eleaf Melo 4 Subohm Tank

$24.95 $21.21
Eleaf Melo 4 sub-ohm tank features an all-new EC2 series coil, an upgraded version based on original EC coils. Pairing with dual large air inlets, Melo 4 sub-ohm tank aims to provide you dense vapor with nice flavor.

Geekvape Ammit 22 RTA for Single Coil Build

$14.99
Geekvape Ammit 22 RTA is a newly released RTA for single coil build. It features 22mm diameter, three-dimensional airflow, 3.5ml reservoir and top-fill system.

Geekvape Ammit RTA with 20mm Build Deck Dual Coil

$29.99
Geekvape Ammit Dual Coil RTA features 20mm build deck, 25mm base diameter, 3ml capacity and 6ml expanded capacity, new 3D airflow system, which aim to offer you top-notch flavor production.

Geekvape Avocado 24 RDTA 5ml

$35.99
Geekvape Avocado 24 RDTA has come out with some specifics: 5ml capacity, easy to build and fill, available for single or dual coil. Perfect flavor experience and 2 drip options included.

Hellvape AmbitionZ VapeR Aequitas 24mm BF RDA

$19.99
Aequitas RDA is the collaboration between Hellvape and AmbitionZ VapeR, featuring 24mm diameter, top terminal, gold plated postless raised build deck and a 3mm deep juice well. With two options for airflow, top and bottom.
A component of your vaping device that includes a coil to vaporize vape juice and create vapor and a reservoir to hold an additional dose of vape juice is known as Vape Tank. The coils attached to this tank produce vapor by wicking the vape juice form the tank and heating it. These tanks are typically made from Pyrex or glass as well as metals like anodized aluminum and stainless steel.

Types

All tanks are not made equal. They may b similar in many ways, but they are also different in the type of vaping experience, their levels of power, and capacity to hold e-liquid, etc. and the amount of e-liquid each one can contain. Some of the different types of tanks available in the market may include Mesh coil tank, Disposable cartridge, RDA, Mouth to lung tank, Sub ohm tank, and RTA, etc.

How to Clean It

When vape tans are used regularly for vaping, then it is necessary to clean them for their proper working and improved looks. It is a stepwise process that goes as under:

Step 1:

To make cleaning of tank easy and efficient, first of all, take the coil out of the tank. You should have careful attention on its connections as you have to replace them also. Now you can clean the tank in many ways. Some of the most effective ways to clean a tank include:

Step 2:

Rinsing the tank normally. You can simply rinse your ape tank with warm water if it is quite clean. After separating the parts of the tank put its every part under the stream of running water and use a paper towel to dry them and allow the air to dry them completely.

But if your tank cannot be cleaned just by rinsing it, then you will have to take more steps to clean it.

Step 3:

Take a cup of water and put it in the microwave for a few minutes. After 2-3 minutes take out the cup form the microwave and put all the parts of the vape atomizer into it and allow them to remain there until the water gets cool. Now dry the tank gently with a paper towel and put it aside for air drying.

Rinse with Propylene Glycol

Alternate methods

Instead of using water, you can also use PG or Propylene Glycol to clean your vape atomizer. Take a cup of PG and put all the parts of the tank in it for one to two hours. After two hours take the tank and its other parts out of the cup and let it drip dry on a paper napkin. It will also remove remnant flavors from the tank. But you should never use VG for this purpose.

Rinsing with a cleaning agent

You can also use various household items to clean your vape atomizer to get better results. But after using these cleaning agents, you should ensure to rinse the tank thoroughly and dry it completely before use. These household cleaning agents may include:

-Ethanol or grain alcohol is a highly effective product for cleaning tanks

-Baking soda can provide a sparkling touch to your tanks by cleaning them thoroughly

-Cheap Vodka can also clean your vape atomizer inexpensively. You can buy it from a nearby store if you do not have it in your home

-Vinegar cleans your tank thoroughly due to its highly acidic properties

-Lemon juice or dish soap can also be used to clean the tank of your vaping device.

But after applying these cleaning agents, you should ensure to rinse the tanks thoroughly and let them air dry by putting them on a paper towel.

Using ultrasonic cleaner

An ultrasonic cleaner can allow you to clean your tanks most thoroughly. This cleaner is used all over the world for cleaning atomizers like used for cleaning precious metals and jewelry. You may not find ultrasonic cleaner specially designed for cleaning tanks. It is not difficult to use an ultrasonic cleaner for this purpose. You can run the ultrasonic cleaner on your tank until it is cleaned properly by filling it with water. You can also add a few drops of liquid dish soap in the cleaner to get the best results.

However, whatever method you use to clean tank you must allow them to dry up completely before using it again.